|
| Dimensions (W x H x D) |
56.03 x 8.78 x 19.53 cm |
| Weight |
Approx. 20 kg (44 lb) |
|
| Display System |
4K SXRD™ panel, projection system |
| Display Resolution |
Computer signal input: Maximum display resolution: 1,920 x 1,080 dots (HDMI Input only) / Video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60 i, 1080/50 i, 1080/60p, 1080/50p, 1080/24p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p |
| Display Resolution |
Computer signal input: Maximum display resolution: 1,920 x 1,080 dots (HDMI Input only) / Video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60 i, 1080/50 i, 1080/60p, 1080/50p, 1080/24p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p |
| Light source |
Laser diode |
|
| Contrast ratio |
: 1 (Dynamic Contrast) |
| Effective display size |
18.80 mm x 3 |
| Effective pixels |
26,542,080 (4096 x 2160 x 3) pixels |
| Projection lens shift |
Vertical: +85% -80% Horizontal: +/-31% |
| Screen size |
1,524 mm to 7,620 mm (60 in to 300 in) |
|
| Projection lens zoom / focus |
Powered (Approx. x2.06) |
|
| Input and Output Terminals |
HDMI (2 INPUTS)*1 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (male), TRIGGER (2 INPUTS) - Minijack, DC 12 V Max. 100 mA, USB - DC 5 V, Max. 500 mA |
|
| Operating temperature / humidity |
5°C to 35°C (41°F to 95°F)/20% to 80% (no condensation) |
| Storage temperature / humidity |
-10°C to +60°C (14°F to +140°F)/20% to 80% (no condensation) |
|
| Acoustic noise |
24 dB*2 |
| Power requirement |
AC 100 V to 240 V, 4.3 A to 1.8 A, 50/60 Hz |
| Power consumption |
430 W |
|
| Light Output |
2,000 lm |
| Color Light Output |
2,000 lm |
|
| Power Consumption (Standby Mode) |
0.4 W (When "Remote Start" is set to "Off") |
| Power Consumption (Networked Standby Mode) - Terminals |
1.0 W (LAN) (When "Remote Start" is set to "On") When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W). |
| Standby Mode Activated |
After about 10 Minutes |
|
| *1 |
Both HDMI inputs are compatible with HDCP 2.2. |
| *2 |
This value is approximate. Depends on the projector setting condition and usage environment. |
